Our regulations for the 2026 season:
Regulation overview:
| MRCP Fronti | MRCP Stock 17.5T | MRCP Modified | |
| Min. Weight | Min. 1250g | Min. 1320g | Min. 1300g |
| Max. Width | 190mm | 190mm | 190mm |
| Tires | Ride TR09 Slick Reifen (Belted) | Rush VR3 36X RU0863a | Rush VR3 36X RU0863a |
| Number of Tires | Max. 2 Sets | Max. 2 Sets | Max. 2 Sets |
| Body shells | free but 0,7mm | free | free |
| ESC | HW ETS Justock HW-30112005-ETS | Blinky Mode | free |
| Motor | HW ETS 17,5T HW-30408011-ETS | Alle 17.5T | free |
| Timing | fixed | free | free |
| Max. Gearing | 4,5 | free | free |
| Battery | Hardcase 2S | Hardcase 2S | Hardcase 2S |
| Tire Additive | MR33 V3 | MR33 V3 | MR33 V3 |
General Info:
Registration:
Please Register on www.myrcm.ch.
To register, a valid myrcm account is required!
Entry Fee:
The entry fee for the first class is € 30,–. For each additional class +€ 15.- The entry fee must be paid on Saturday from 2 p.m. on site at the technical inspection.
Entry deadline:
Until Wednesday 11:59 p.m. before the racing event
Race starts:
Each class starts with 5 drivers present. Guest classes available upon request.
Race process::
Saturday
Training from 9 a.m., divided into classes if necessary.
Sunday
1x timed training in groups
3x Qualifying 5min
3x Final 5 min
The 2 best rounds will be counted
Regulations in detail:
Batteries
- all „Hardcase“ 2S batteries are allowed
- The batteries may only be charged in the Lipo Bag
- max. final charging voltage: 8,40V (The measurement during technical acceptance applies) also HV batteries may only be charged up to 8.40V
- max. charging current: 12A
- max. discharge current: 20A
- External heating of the batteries is prohibited!
Tires
- Max. 2 sets of the prescribed complete tires per event. (See class-specific regulations)
- Tires must be marked before the first run during technical inspection.
- Tires are available from the organizer on site at each event.
- Only new, originally packaged sets of tires will be marked and admitted to the race
- The tires may only be cleaned with brake cleaner (acetone-free) or tire additive
Body Shells
- Bodies should correspond to the respective classes. Touring car -> Touring car body shell, Fronti -> Frontishell, usw.
- Only the spoilers/rear wings belonging to the body may be used.
Tyre additive
- For all events and all classes only MR33 V3 additive is allowed
- You must bring your own adhesive or can purchase it from the organizer.
Technical Inspection
- During the event, the technical inspection team checks compliance with the maximum charging/discharging voltage and charging in the Lipobag!
- Before every run we check battery voltage, minimum weight, tire number and bodyshells
- Blinky mode testing is carried out randomly and unannounced before or after a run.
Class regulations
MRCP Fronti:
- Minimum Weight: min. 1250g
- Max. Width: 190mm
- Tires: Ride Belted (RI-36086)
- Body Shells: only Fronti Shells wit 0,7mm strength
- Motor and ESC: HW ETS
Xerun XR10 Justock G3S
(Motor HW-30408011-ETS / ESC HW-30112005-ETS) - RPM Limit 17.500 U/min – ETS Firmware
- Max. Gearing: 4,5
- capacitor are not allowed
MRCP Stock 17.5T:
- Minimum Weight: min. 1320g
- Max. Width: 190mm
- Tires: Rush VR3 36X – RU0863a
- Body Shells: frei
- ESC: „blinky“ Mode
- Motor: all 17.5T Stock Motors according to current EFRA List (EFRA Spec 17.5T).
- Timing: free
- Max. Gearing: free
MRCP Modified:
- Minimum Weight: min. 1300g
- Max. Width: 190mm
- Tires: Rush VR3 36X – RU0863a
- Body Shells: free
- ESC: free
- Motor: free
- Timing: free
- Max. Gearing: free
